Aquael AQUAJET PFN 1500
Pond fountain pump, fountain 1500l/h 1,6m
Advantages:
-universal in application - as fountain drive, filters, cascades or UV lamps
-low energy consumption
-functional mounting base
The AQUAJET PFN 500, PFN 1000, PFN 1500 and PFN 2000 fountain pumps are designed for pumping and filtering water in fountains, cascades, ponds, garden ponds and backyard pools.
They can also be used in other conditions, e.g. in horticulture, households and farms, fish and other animal husbandry, construction sites, etc. The small size, high efficiency and the possibility to regulate the flow rate and, above all, the simplicity of construction make the AQUAJET PFN pumps universal and effective. AQUAJET PFN pumps are effective, durable and easy to operate.
The pump can be used in swimming pools provided no one is in the water. AQUAJET PFN pumps can only be used for liquids up to 35°C. The AQUAJET PFN 1000, PFN 1500 and PFN 2000 models can operate in salt water. The AQUAJET PFN model is designed for indoor use.
Description of operation:
The AQUAJET PFN pump line is characterised by very high efficiency in relation to its power. This is the result of the use of modern, energy-efficient motors and high-quality seals under the impeller chamber, which reduce efficiency losses to a minimum. What is more, the latter solution also allows the AQUAJET PFN pump to operate outside of water (it is completely sealed) and influences the high head, which makes it possible to use the AQUAJET PFN pumps as circulation pumps.
For the convenience of users, all AQUAJET PFN models have been equipped with an infinitely variable output control system, via an ergonomic knob located on the pump's discharge nozzle. Thanks to it, the strength of the water jet can be easily adjusted.
Thanks to the use of a ceramic impeller shaft in the AQUAJET PFN 1000-2000 pumps, they are characterised by extremely quiet operation. A large sponge prefilter protects the impeller of the pump from impurities so that it does not require frequent cleaning.
The AQUAJET PFN pumps are driven by a watertight, synchronous motor that has low maintenance requirements. It is sufficient to clean the impeller seat once a month. To prevent drops in pump performance, the filter cartridge should be cleaned by rinsing it in water taken from the pond, which does not destroy the bacterial flora in the sponge and counteracts the reduction in biological filtration performance. The frequency of rinsing the cartridge depends on the degree of water contamination and should be carried out when the pump's performance decreases significantly.
Pumps of the AQUAJET PFN series have been manufactured in compliance with the currently applicable safety standards. The pump may only be connected to the mains via a plug socket with a protective contact. The plug should be connected to a mains socket located in a dry place. The mains plug must be unplugged from the socket before any pump operation - installation, cleaning.
Additional Accessories:
Additional accessories, from the AQUAEL range, can be used to extend the capabilities of the AQUAJET PFN pumps:
for AQUAJET PFN 500 pumps - KR-1 fountain nozzle sets
for AQUAJET PFN 1000, 1500 and 2000 pumps - KR-3 fountain nozzle sets
for AQUAJET pumps PFN 1000, 1500 and 2000 - LIGHTPLAY RING S illuminated nozzles
Technical data:
Power supply: 230V, 50hz
Power: 22W
Max flow rate: 1500 l/h
Headroom : 160cm
Pump dimensions : 26cm x 18cm x 9cm
Gross weight: 1.8 kg
Power cable length: 5 m
Height of dispersal tip from base: 50cm
Connection diameter: 3/4 inch
Overheating protection: yes
Capacity adjustment: yes
-
75.00€
- Availability: In Stock
- Brand: Aquael
- Power connection: EU plug
- Shipping Time: 5-7 Days
- Product Code: PFN 1500