SunSun CET-8000 pond pump with 8000l/h 5m controller

The CET-8000 pond pump is equipped with a number of practical solutions aimed at facilitating operation and ensuring high quality and durability. The energy-efficient motor is very quiet and does not generate excessive vibrations. The pump is suitable for operation in both fresh and salt water tanks.

The drive is transferred to the impeller via a ceramic axle, which significantly extends the life of the unit. In addition, the design of the CET-8000 does not contain any element made of copper.

The pump is equipped with automatic protection against ‘dry’ operation without water, thus eliminating the risk of related failures. In addition, the unit has a mechanism to cut off power to the pump in the event of impeller blockage.

The pump can operate both vertically and horizontally.

With the CET-8000 pump controller, it is possible to set the capacity at which the unit operates from 3500-8000l/h. The controller also has a feeding function that interrupts pump operation for 10 minutes.

Operating modes (wattage - flow - h. max):

1) 18w - 3500l/h - 1.6m

2) 23w - 4000l/h - 1.9m

3) 28w - 4600l/h - 2.3m

4) 35w - 5000l/h - 2.7m

5) 42w - 5400l/h - 3.1m

6) 51w - 5800l/h - 3.5m

7) 60w - 6200l/h - 3.9m

8) 66w - 6700l/h - 4.5m

9) 73w - 7200l/h - 4.8m

10) 80w - 8000l/h - 5,4m

Controller power consumption 10%

Technical data:

    Power: 80W
    Max capacity: 8000l/h
    Adjustable capacity from 3500-8000l/h
    Maximum water column lift: 5m
    Hose fit: 20mm (3/4 inch) / 25mm (1 inch) / 32mm (1 1/4 inch)
    Power cable length from plug to controller: 190cm
    Cable length from controller to connector: 20cm
    Length of cable from connector to pump: 190cm
    Pump dimensions: 192x106x123mm