Aquael PFN 15000 ECO 125W 14000l/h
ENERGY-EFFICIENT POND PUMP
Highly efficient and energy-saving fountain pump designed for pumping water in garden ponds, fountains, cascades, ponds and backyard pools.
It can also be used for other purposes, e.g. in horticulture, households and farms, fish and other animal husbandry, construction sites, etc. The pump can also operate in salt water.
The innovative design ensures that the unit is highly energy-efficient - just 125 watts - which significantly reduces the pump's running costs.
The pump provides high capacity and head in a compact size. This is a result of the use of a modern, energy-efficient motor and high-quality seals under the impeller chamber, which reduce efficiency losses to a minimum.
The pump can also be used in swimming pools, provided that no one is in the water when the pump is operating. The pump can be used to pump liquids up to 35°C.
Pump features:
Ceramic impeller for exceptional durability - the pump is powered by a watertight, synchronous motor with low maintenance requirements. The ceramic impeller axle is virtually wear-free and ensures the longevity of the pump. The use of a ceramic impeller axle also ensures very quiet pump operation.
Large plastic prefilter - protects the pump impeller from impurities that could prevent it from operating. The use of this solution ensures continuous pump operation and eliminates the need for frequent cleaning of the unit.
Easy connection of hoses - the pump has been equipped with a thread and stepped spigot allowing the connection of a fountain adapter (not included) to the pump, hoses for filter connection or water outlet to the cascade.
Solid base - provides adequate support and prevents the pump from moving during operation.
Compact dimensions - despite its high capacity, the pump has a very compact design so it will fit even in a small pond.
Convenient handle - allows the pump to be carried easily and safely.
The pump can operate inside the pond, fully submerged or outside the pond (after removing the prefilter and connecting a hose at the pump inlet).
Full operational safety
The pump has been manufactured in accordance with current safety standards. The unit may only be connected to the mains via a plug socket with a protective contact. The mains socket should be in a dry location.
If the impeller stops, the inlet or outlet is clogged as a result of contamination or dry running, the thermal switch installed in the pump will disconnect it from the mains until it has cooled down. It will restart automatically once the unit has cooled down.
Easy and quick cleaning of the pump
For uninterrupted operation, it is sufficient to clean the impeller chamber once a month. To prevent a drop in pump performance, the pre-filters should be cleaned regularly by rinsing them in water taken from the pond. Using water taken from the pond preserves the correct bacterial flora on the prefilters and counteracts any reduction in the efficiency of the biological filtration in the tank. The frequency of prefilter flushing depends on the level of contamination of the water in the pond and should be carried out when the pump capacity is significantly reduced.
Technical data:
Energy-saving pond pump
Capacity: 14,000 l/h
Maximum delivery head: 6,5 m
Power: 125 W
Graduated hose connection: 32 / 40 / 50 mm (1½" - 1 ¾" - 2")
Degree of protection of housing: IPX8
Power cable length: 10 m
Operation in water
Operation outside water
Protection against overheating
Dry-running protection
-
211.00€
- Availability: In Stock
- Brand: Aquael
- Power connection: EU plug
- Shipping Time: 5-7 Days
- Product Code: PFN 15000